Red Dot 1X35-rifle scope

产品搜索

您现在的位置：rifle scope > exhibition > Red Dot 1X35

Red Dot 1X35

Red Dot 1X35 AR Prism Rifle Scope Kalashnikov AK Sight Picatinny Rail Mount

New Tactical Red Dot Sight

fit Picatinny Rail Mount riflescope

Description:

"SKWOPTICS new type optical RED DOT sight" is a new type of easy to use sight controlled by prism system photoelectric imaging microelectronics.

It has a large field of view, day / night, fast aim, suitable for all kinds of firearms with 1913 rail connection seat at all levels.

It is especially suitable for aiming at targets around 100 meters.

It can use 1 MOA park and a 68 MOA ring to aim the target quickly.

Features:

(1) From the enemy's side, the light source of the red spot sight cannot be seen, which is beneficial for the shooter's concealment during night combat.

(2)The light source is installed inside the machine, ensuring 100% waterproofing. It will never fail in rain or river water.

(3) High aiming accuracy. The aiming ring is basically immovable and the parallax is very small.

(4) Adopting a prism optical system and an aspheric lens group，the field of view of the window is clean and bright, and the aiming ring is clear, continuous and sharp, without any secondary image.

(5) It can work with a night vision .

(6) Equipped with a large capacity battery, with a standby time of 1200 hours.

Specification:

Magnification: 1x

Length / Width / Height(mm): 96 x 54 x 64

Finish: BLACK Matte

Lens Size： Width/Height(mm): 20 x 28

Reticle Circular
Dimensions: 68 MOA

Reticle Center Dimensions: 2MOA

Reticle color: Red

NV Model: Yes

Reticle in NV: White

Day model: Reticle is red, and the brightness is adjustable in 10 levels;

NV model: Reticle is white, and the brightness is adjustable in 5 levels.

Transmittance in Day 80%

Light leakage rate in Enemy direction: ≤ 0.2%

Lens Coating: Fully Multi-Coated & RainGuard

Field of View: 36 ft@100yds/12m@100m

Weight(gr): 250

Length(mm): 96

Eye Relief(mm): Unlimited

Click Value: 0.28Mrad @100m

Adj Range: 60 MOA 19.8Mrad

The Anti fog standard level: I & conforms to JBT9384-2-1999

Shockproof Level: 850G/s

Waterproof Level: IPX7

Battery Type: CR2450

The average continuous working time of the battery: 1200 Hours

Packaging details:

A Red dot scope 1pc

A Scope cloth 1pcs

A wrench 1pc

This Red Dot Sight based on "Beam Splitter" principle

This structure originated from the HUD on the aircraft and was used in air combat during World War I and World War II.It is still used by a large number of aircraft for aiming.

The following figure is the schematic diagram of the head up display（HUD) of the fighter:

The above figure is too complicated. We simplify it. The following figure shows us it how to working :

The Ture HDU Sight On Fighterf：

Its biggest feature is that compared with the general Reflective HUD Red Dot, the parallax is smaller, which is nearly the holographic sight, so the accuracy is very high,while its price is very cheap.
Because it uses that all light rays are parallel. It uses a convex lens to turn the cone-shaped light source into parallel light, and then uses a flat beam splitter to refract, so as to ensure that the line of sight is nearly parallel when it reaches the eyes of shooter.

The following figure shows the HDU Red Dot, which differs from the traditional Reflective Red Dot in working principle:

As can be seen in the figure, the rays of the former are parallel; The light of the latter is divergent, and the divergent light will seriously affect the aiming accuracy.

How does HDU RED DOT work :
The SKWOPTICS HUD Red Dot is composed of the following 3 parts:
an LED light source, a Convex Lens group, and a Glued bak4 prism.
LED light Source：
responsible for emitting strong light; The light is cone-shaped and scattered.
Convex Lens Group:
Change the cone-shaped light into a parallel light.
Glued Prism:
the glued prism is made of bak4 material and bonded by two pieces of glass with glue. There is an inclined beam splitter in the prism.
Working principle:
after the light is emitted from the LED light source, the conical light is changed into parallel light by the convex mirror group.
After the parallel light is emitted, it is refracted in a group of glued prisms, and the light changes direction again, becoming parallel light, entering the human eye, forming a correct aiming state.
The biggest advantage of this red dot structure is that the parallax of the aiming mark is very small, the deformation of the pattern is also very small, and the aiming pattern with BDC function can be produced. This is incomparable to ordinary red dot sight.