• 
  

• Magnification: 6-24

• 
  

• Objective lens: 50mm

• 
  

• Tube piece: single

• 
  

• Tube size: 30mm

• 
  

• Coating: FMC

• 
  

• Eye Relief(mm): 94

• 
  

• Eye Pupil(mm): 11.1-1.8
  

• Field of View(ft@100yds): 17.8~ 4.6

• 
  Windage Range of Adjustment: 50 MOA

• 
  Elevation Range of Adjustment: 86 MOA

• 
  MIL Adjustment: 0.1

• 
  Finish: Matte black

• 
  Waterproof: Yes

• 
  

• fogproof: Yes

• 
  

• Max Recoil: 1200g/s

• 
  

• Battery: CR2032 3V(No include)

• 
  

• Nitrogen: Full filled Nitrogen

• 
  

• Length : 370MM

• Weight: 736g
  

• Side Focus: 10YDS ~infinity

• 
  

• Reticle: Glass-etched

• 
  

• Physical hard Coating

  Physical hard Coating gives you an extra protection on the exterior lenses from dirt, oil and scratches or anything else mother nature can throw at you.

  6061 T6 Aluminum

  The 6061T6 aircraft grade aluminum tube that has exceptional strength and superior mechanical integrity will protect these world class optics no matter what punishment you throw at it.

  Exposed Tactical Direct Dial

  Exposed Direct Dial Turrets for elevation and windage allow you to quickly make adjustment as you needed and engage your target within a blink of your eyes

  One Piece Tube

  Construction Heat treated one piece tube gives the scope extra strength over multi-piece tubes. A one piece tube also is better at keeping moisture out thus keeping your scope fog proof for the life of the product

  Waterproof

  Waterproof to protect the scope in the harshest weather conditions or if accidently submerged underwater

  Fog proof

  Fog proof to allow you to immediately engage your target when you take your rifle to cold ambient temperature from warm inside Shockproof Robust mechanical system with special designs on both control and erector system that give you the ultimate recoil resistance to withstand 1000G recoil for 1000 times.

  Nitrogen Purged

  Nitrogen Purging uses the inertia gas with bigger size molecules to purge any moisture out of the tube giving you better waterproofing and thermal stability .

FFP is the abbreviation or abbreviation of "first focal" . Most modern variable powered riflescopes will have the reticle installed in one of two ways, in the first focal plane or the second focal plane. Now, there are one or two manufacturers that have scopes with reticles in both focal planes but this is more the exception than the rule. The focus of this article though will be the differences between FFP and SFP reticles and what that means to the shooter. First Focal Plane: First focal plane optics are fairly common with many European manufacturers however that is no so much the case with some American optics companies. It wasnrsquot until just recently that some of the larger names in the American optics industry began to offer scopes with first focal plane reticles. Part of the reason is that this method is costly and time consuming from a production and design stand point. First focal plane optics have the reticle installed towards the front of the erector or forward of the lenses that help control the magnification range of the scope. What this means is that as that scope goes through its magnification range the reticle will appear to change size, becoming thinner or thicker depending on the magnification. The reticle isnrsquot actually changing size but is in fact maintaining its size relative to the target image in the scope meaning that its subtensions stay the same. With the subtensions staying the same throughout the magnification range range estimation, trajectory compensation, and zeroing can be performed on any power greatly increasing the scopes utility. The rough diagram below shows reticle placement in a first focal plane optic. Note its forward position in the erector.